|
 |
HOSE TYPES, DESIGNS & APPROVALS
Pharmaline GP has a PTFE hose liner tube, manufactured from PTFE
material in accordance with FDA requirement 21 CFR 177.1550. An
antistatic PTFE option is also available, Pharmaline AS, using liner
material in accordance with the FDA requirement 21 CFR 178.3297.
Both Pharmaline GP and Pharmaline AS have been tested and the
PTFE liners comply with USP Class VI, including the Elution
(Cytotoxicity) test.
Both include grade 304 SS wire Braid, and a Platinium Cured white
silicone rubber cover (Postcured 4 hours at 200°C in accordance with
requirements for USP Class VI). The Silicone Rubber material is in
accordance with FDA requirement CFR-
177-2600.
ATEX - Attestations of Conformity and Labelling are available for the Pharmaline range of hose and hose assemblies.
PROPERTIES
- Temperature Range: -60°C (-80°F) to +200°C (+400°F).
- Pressure vs Temperature - Pressure ratings are as listed up to 130°C ( 266°F), then reducing at 1% per 1°C (1.8°F) up to
+200°C (400°F).
- Vacuum - All sizes fully vacuum resistant up to 130°C.
FURTHER TECHNICAL INFORMATION
Further technical information related to PTFE
material, Antistatic specifications, usage
requirements and limitations, testing and flow rates
etc. is available in the Bioflex Product Information
pages on the OPW market website. |
CRIMPED END FITTINGS
- Sanitary and Mini Sanitary Triclamp (Triclover)
Fittings in 316 SS, with bores electropolished to
<0.375μm (<15μin).
- I-Line Fittings, Compression Fittings, BSPT & NPT
Male, Flanges, Camlocks, DIN11851, RJT, SMS,
RJP and others are also available to special order.
RELINK END FITTINGS
“Relink” Self Assembly, Re-usable end fittings are
also available for end fitting types as listed above.
These can be assembled and disassembled by the
Customer, and are to a Patented Design. The
purchase of a Relink Hand press is required, and
further information is available on the Relink leaflet on the OPW market website. Available for use with hose up to 1” -
25.4mm |
|
